American Hospital Grade Power Cords for Medical Equipment | UL/cULus, ETL Listed Green Dot
American Hospital Grade Power Cords
Our full range of hospital grade power cords is purpose-built for North American healthcare facilities, delivering safe, reliable connectivity for patient-care equipment. Available in NEMA 5-15P, 5-20P, 6-15P and 6-20P configurations, all medical grade power cords carry official green dot certification and meet UL 60601-1, UL 817 and cUL medical safety standards. Rated 10–20A at 125V/250V AC, these hospital grade power cables feature solid nickel-plated brass blades, flame-retardant medical-grade PVC jackets, reinforced strain relief and pure copper conductors. Fully RoHS, REACH, PAHS, and Prop 65 compliant, they suit patient monitors, diagnostic devices, medical carts and clinical instruments, with custom lengths and wire gauges available.
Power Cord & Power Connectors Manufacturer With RoHS, Reach, PAHs Compliant.
Frequently Asked Questions
Common questions about American NEMA power cords
The green dot identifies a hospital-grade attachment plug and matching connector that pass the extra UL 817 and CSA C22.2 No. 21 tests for grounding reliability, blade retention, strain relief and impact resistance. It uses solid rather than folded brass blades and a reinforced ground pin that cannot easily bend or pull out.
They are required for cord-connected equipment in the patient-care vicinity of hospitals, clinics, dental and imaging rooms as defined by NEC Article 517, and are commonly used on patient monitors, infusion pumps, beds, carts and medical IT carts. Many facilities also specify them in non-patient areas for added durability.
We supply green-dot NEMA 5-15P and 5-20P (125V, 15A/20A) and 6-15P/6-20P (250V) plugs and connectors, molded to durable SJT or SJTO jacketed cord and available with IEC C13 or C19 equipment connectors.
No. Hospital grade refers to the mechanical durability and grounding integrity of the plug, connector and cord under UL 817; it does not by itself make a device IEC 60601-1 compliant. The end equipment medical certification is separate, but the green-dot cord is the required interconnect for many 60601 devices.
Yes, we build custom lengths, gauges and NEMA-to-IEC hospital-grade cord sets under UL, cUL and ETL files and provide samples in 7 to 15 days with full documentation. Typical MOQ is 200 to 1,000 pieces and lead time is 15 to 20 workdays.
