Japan Power Cords With PSE Certifications, JIS C 8303 Standards
Japan Standards PSE Approval Power cords
We supply fully customizable Japan power cords that can be manufactured into various cord sets with diverse connectors and multiple wire specifications according to customer requirements, technical drawings or product samples, including Japan power cable configurations with IEC 60320 C5, C7, C13, C14, C15, C19, C20 and other standard interfaces. Our Japan power supply cords are widely compatible with desktop computers, laptops and various household electrical appliances, offering both 2-pin Japan plugs and 3-pin Japan plugs where the majority are PSE-certified Type A and Type B plugs with rated currents of 7A, 12A, 15A and a rated voltage of 125V, and we also support bespoke OEM Japan power cord solutions with any combination of plug types and cable specifications. All our Japan power cords, matching plugs, cables, connectors and sockets have obtained full PSE certification in compliance with JIS C 8303 standards, and also conform to EU RoHS, REACH and PAHS environmental protection directives for reliable and eco-friendly performance.
Japan PSE 2 pins JIS C 8303 plug to IEC 60320 C7 Connector, Japan Power Supply Cords with PSE Certified List. Built to Japan JIS C 8303, IEC 60320 C7 Standards.
Japan PSE 3 pins JIS C 8303 plug to IEC 60320 C13 Connector, Japan Power Supply Cords with PSE Certified List. Built to Japan JIS C 8303, IEC 60320 C13 Standards.
Japan PSE 3 pins JIS C 8303 plug to IEC 60320 C13 Connector, Japan Power Supply Cords with PSE Certified List. Built to Japan JIS C 8303, IEC 60320 C13 Standards.
Japan PSE 3 pins JIS C 8303 plug to IEC 60320 C13 Left Angle Connector, Japan Power Supply Cords with PSE Certified List. Built to Japan JIS C 8303, IEC 60320 C13 Standards.
Japan PSE 3 pins JIS C 8303 plug to IEC 60320 C13 Right Angle Connector, Japan Power Supply Cords with PSE Certified List. Built to Japan JIS C 8303, IEC 60320 C13 Standards.
Japan PSE 3 pins JIS C 8303 plug to IEC 60320 C5 Laptop Connector, Japan Power Supply Cords with PSE Certified List. Built to Japan JIS C 8303, IEC 60320 C5 Standards.
Japan PSE 3 pins JIS C 8303 plug to IEC 60320 C15 Connector, Japan Power Supply Cords with PSE Certified List. Built to Japan JIS C 8303, IEC 60320 C15 Standards.
Japan PSE 3 pins JIS C 8303 plug to IEC 60320 C19 Connector, Japan Power Supply Cords with PSE Certified List. Built to Japan JIS C 8303, IEC 60320 C19 Standards.
IEC 60320 C14 plug to stripped and tinned, straight, left angle or right angle, with UL, ETL, VDE, TUV, CE, SAA, KC, PSE certified. Built to IEC 60320 C14 Standard.
IEC 60320 C19 left angle connector to stripped and tinned, straight and right angle also available, with UL, ETL, VDE, TUV, CE, SAA, KC, PSE certified. Built to IEC 60320 C19 Standard.
IEC 60320 C20 plug to stripped and tinned, right angle also available, with UL, ETL, VDE, TUV, CE, SAA, KC, PSE certified. Built to IEC 60320 C20 Standard.
Rating:
16A - 250V
Plug Type:
IEC 60320 C20 Plug
Connector Type:
Stripped and tinned
For Japan Power Cords, PSE Power Cords and other specs not shown above, send the drawing or part number through the contact page and we will reply with price and lead time.
Power Cord & Power Connectors Manufacturer With RoHS, Reach, PAHs Compliant.
Frequently Asked Questions
Common questions about Japan PSE JET Power Cords
They are built to JIS C 8303 and use the Japanese Type A plug (two parallel flat pins, matching NEMA 1-15) and the grounded Type B plug (with a round earth pin, matching NEMA 5-15). Both 2-pin and 3-pin versions are supplied.
Japan uses 100V mains, and the cords are rated 125V AC at 7A, 12A and 15A. Frequency is 50Hz in eastern Japan (Tokyo) and 60Hz in western Japan (Osaka); the cords work at both frequencies.
Yes. Power cords and cord sets fall under Japan's Electrical Appliance and Material Safety Law and require PSE marking, issued through registered certification bodies such as JET. The diamond PSE mark applies to specified products and the round mark to others.
Japanese Type A and NEMA 1-15 share the same flat-blade geometry and are physically compatible at 100-125V, but JIS C 8303 has stricter dimensional and marking requirements and many Japanese cords use a separate ground lead instead of a third pin. PSE approval is still required for Japan.
They can be terminated with IEC 60320 C5, C7, C13, C15, C19 and C20 connectors, including right-angle C19 versions, as well as open-end cords for equipment manufactured for the Japanese market.
Many older Japanese homes historically had ungrounded outlets, so double-insulated appliances use 2-pin Type A cords, with grounding handled by a separate earth wire or dedicated grounded outlet. 3-pin Type B cords are supplied for appliances that require protective earth.
