What is a Japanese standard-rectangular Type A two-pin power cord with bare, stripped wire ends?

This cord has a moulded Type A two-pin rated 7A, 12A, 15A 125V on a 2-wire, non-earthed cable for double-insulated Class II appliances. The equipment end is supplied with the outer jacket removed and both conductors stripped, ready to wire into the appliance or terminal block. It is certified to PSE.

What certification does this Japanese power cord carry, and where is it used?

The finished cord set is certified to PSE for the target market; test reports and the certificate are available on request, and the cable uses RoHS-, REACH- and PAHS-compliant materials.

How do I connect the stripped bare ends to my equipment?

Feed the two stripped conductors into the appliance terminal block or cord clamp, tighten the screws and secure the strain relief so the cable cannot pull loose. Ends can also be supplied tinned or pre-fitted with ring or fork terminals.

Can this 2-wire cord be used in place of a grounded 3-wire cord?

No. A 2-wire, non-earthed cord is only for double-insulated Class II appliances and must never replace an earthed cord on equipment needing a protective-earth connection.

What standard does this Japanese cord meet, and what is JIS C 8303?

JIS C 8303 is the national standard the cord is manufactured and tested against; it defines the plug dimensions, pin layout and safety requirements for the target market. The certified cord carries the PSE approval and is supplied to that standard.

Can the opposite end be stripped, tinned or fitted with a terminal?

Yes. We strip the cable back to length, fit terminals or a connector, and size the strain relief to the equipment. Each finish is described in power cord wire end options .

Japan Power Cords, JIS C 8303 Plug, Type A, 2 poles, PSE Certified

Japan Power Cords, 7A, 12A, 15A 125V, Type A Plug. The Japan AC Cords according to JIS C 8303 Standards with PSE certification. Non-Rewirable Plug 2 poles without Earthing Contact Moulded with Non-rewirable Flexible Cords. This Japan Two prong Power Cords match cable for general applications include Flexible cables with thermoplastic PVC Insulation and Flexible cables with crosslinked elastomeric Rubber Insulation in Japan market. Our Japan Power Cords Products are fully molded with a low profile ergonomic design and RoHS and Reach compliant.

Electrical Rating:7A, 12A, 15A

Voltage:125V

Plug / Connector:JIS C 8303

Number of Poles and Wires:3 poles, 3 wires

Approvals:PSE Certified

Samples:Available
Batch lead time:15-20workdays
MOQ:200 - 1000 Pieces
Production capacity:2 million pieces per month
Currency:Export business supports settlement in RMB, USD, EUR and GBP etc.
Export rights:We are a China-based factory with our own export license.

The basic standard used to investigate products in this category is Japan JIS C 8303, and the assembly is supplied under PSE Certified marking, RoHS and REACH compliant.

Categories: Japan PSE Power Cords

Japan Power Cords, JIS C 8303 Plug, Type A, 2 poles, PSE Certified Product Description


Plug / Connector Standard:	JIS C 8303
Approvals:	PSE Certified
Maximum Current rating:	7A, 12A, 15A
Maximum Voltage:	125V
Number of Poles and Wires:	3 poles, 3 wires
Indoor/Outdoor:	Both Available
Copper Conductor Material:	Oxygen free Copper (OFCU)
Outer Jacket Material:	PVC, Rubber, Halogen-Free, Textile braid
Blade Material:	Nickel Coated Brass
Flamability Rating:	UL 94V-0
Color	Black / White are standards, but any color available customized
Environmental Certifications:	RoHS, Reach, PAHs, Prop 65
Testing:	Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity
Country of Origin:	Made In China
Packing:	Standard Export Carton, Pallets

Japan Power Cords, JIS C 8303 Plug, Type A, 2 poles, PSE Certified Available Cord / Cables Wire Styles

Gauge/ # Conductors	Cord Type
2x0.75mm² 7A, 125V~	(H)(V)FF, (H)(H)FF, (H)VCTF, (H)VCTFK
2x1.25mm² 12A, 125V~	(H)(V)FF, (H)(H)FF, (H)VCTF, (H)VCTFK
2x2.0mm² 15A, 125V~	(H)(V)FF, (H)(H)FF, (H)VCTF, (H)VCTFK