What is a Japanese grounding-clip Type B grounded power cord with bare, stripped wire ends?

This cord has a moulded Type B grounded rated 7A, 12A, 15A 125V on a 3-wire (live, neutral, earth) cable. The equipment end is supplied with the jacket removed and all conductors stripped, ready to wire into the appliance or terminal block. It is certified to PSE.

What certification does this Japanese power cord carry, and where is it used?

The finished cord set is certified to PSE for the target market; test reports and the certificate are available on request, and the cable uses RoHS-, REACH- and PAHS-compliant materials.

How do I wire the stripped ends, and which conductor is the earth?

On the Japan Power Cords C 8303 Plug Type A, connect live and neutral to the corresponding terminals and the green/yellow conductor to the protective-earth terminal, then secure the strain relief. Ends can be supplied tinned or pre-fitted with terminals.

What is the difference between the 2-wire and 3-wire versions?

On the Japan Power Cords C 8303 Plug Type A, the 2-wire version has no earth and suits double-insulated Class II appliances; the 3-wire version adds a protective-earth conductor for grounded Class I equipment. Choose the version matching the appliance class and inlet.

What standard does this Japanese cord meet, and what is JIS C 8303?

JIS C 8303 is the national standard the cord is manufactured and tested against; it defines the plug dimensions, pin layout and safety requirements for the target market. The certified cord carries the PSE approval and is supplied to that standard.

Can the opposite end be stripped, tinned or fitted with a terminal?

Yes. We strip the cable back to length, fit terminals or a connector, and size the strain relief to the equipment. Each finish is described in power cord wire end options .

Japan Power Cords, JIS C 8303 Plug, Type A, 3 poles, PSE Certified

Japan Power Cords, 7A, 12A, 15A 125V, Type A Plug. The Japan AC Cords according to JIS C 8303 Standards with PSE certification. Non-Rewirable Plug 2 poles with Earthing Contact Moulded with Flexible cords. This Japan Three prong Power Cords match cable for general applications include Flexible cables with thermoplastic PVC Insulation and Flexible cables with crosslinked elastomeric Rubber Insulation in Japan market. Our Japan Power Cords Products are fully molded with a low profile ergonomic design and RoHS and Reach compliant.

Electrical Rating:7A, 12A, 15A

Voltage:125V

Plug / Connector:JIS C 8303

Number of Poles and Wires:3 poles, 3 wires

Approvals:PSE Certified

Samples:Available
Batch lead time:15-20workdays
MOQ:200 - 1000 Pieces
Production capacity:2 million pieces per month
Currency:Export business supports settlement in RMB, USD, EUR and GBP etc.
Export rights:We are a China-based factory with our own export license.

The basic standard used to investigate products in this category is Japan JIS C 8303, and the assembly is supplied under PSE Certified marking, RoHS and REACH compliant.

Categories: Japan PSE Power Cords

Japan Power Cords, JIS C 8303 Plug, Type A, 3 poles, PSE Certified Product Description


Plug / Connector Standard:	JIS C 8303
Approvals:	PSE Certified
Maximum Current rating:	7A, 12A, 15A
Maximum Voltage:	125V
Number of Poles and Wires:	3 poles, 3 wires
Indoor/Outdoor:	Both Available
Copper Conductor Material:	Oxygen free Copper (OFCU)
Outer Jacket Material:	PVC, Rubber, Halogen-Free, Textile braid
Blade Material:	Nickel Coated Brass
Flamability Rating:	UL 94V-0
Color	Black / White are standards, but any color available customized
Environmental Certifications:	RoHS, Reach, PAHs, Prop 65
Testing:	Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity
Country of Origin:	Made In China
Packing:	Standard Export Carton, Pallets

Japan Power Cords, JIS C 8303 Plug, Type A, 3 poles, PSE Certified Available Cord / Cables Wire Styles

Gauge/ # Conductors	Cord Type
3x0.5mm², 3x0.75mm², 3x1.25mm², 3x2.0mm²	VCT, VCTF, HVCTF
3x0.5mm², 3x0.75mm², 3x1.25mm², 3x2.0mm²	2PNCT

Different length, jacket color or plug? See how to customize a power cord.

Power Cords Supplier, Manufacturer In China

Japan Power Cords, JIS C 8303 Plug, Type A, 3 poles, PSE Certified

Japan Power Cords, JIS C 8303 Plug, Type A, 3 poles, PSE Certified Product Description

Japan Power Cords, JIS C 8303 Plug, Type A, 3 poles, PSE Certified Available Cord / Cables Wire Styles

More pictures of Power Cords for reference:

Power Cords Terminals Processing Available Opposite End

Remove Outer Jacket

Remove Outer Jacket Semi-Strip

Semi-Strip, Cores Intact

Tooth Terminals

Metal Fasten Bolt

Ferrite Core, Anti-Interference

PG Waterproof Strain Relief

303 On/Off Switch

Foot On/Off Switch

IEC 60320 C5, C13, C14, C15, C19, C20 cord set connectors, paired to the plug on this page.

Packaging Method For Power Cords

Japan PSE Power Cords Packaging with Export Cartons, Pallets, FCL or LCL, Container by Sea or Air.

Related Product

Japan Power Cords, JIS C 8303 Plug, Type A, 2 poles, PSE Certified

Japan Power Cords, JIS C 8303 Plug, Type A, 2 poles, PSE Certified

Japan Power Cords, JIS C 8303 Plug, Type B, 3 poles, PSE Certified

Japan Power Cords, JIS C 8303 Plug to IEC 60320 C7 Connector, Type A, 2 poles Plug, PSE Certified

Japan Power Cords, JIS C 8303 Plug, Type A, 2 poles, PSE Certified

Japan Power Cords, JIS C 8303 Plug to IEC 60320 C15 Connector, Type B, 3 poles Plug, PSE Certified

Japan Power Cords, JIS C 8303 Plug to IEC 60320 C19 Connector, Type B, 3 poles Plug, PSE Certified

Frequently Asked Questions

Online Inquiry

Subject: Loading...