What is a European CEE 7/16 power cord with bare, stripped wire ends?

This cord has a moulded CEE 7/16 rated 2.5A 250V on a 2-wire, non-earthed cable for double-insulated Class II appliances. The equipment end is supplied with the outer jacket removed and both conductors stripped, ready to wire into the appliance or terminal block. It is certified to VDE, TUV.

What certification does this European power cord carry, and where is it used?

The finished cord set is certified to VDE, TUV for the target market; test reports and the certificate are available on request, and the cable uses RoHS-, REACH- and PAHS-compliant materials.

How do I connect the stripped bare ends to my equipment?

Feed the two stripped conductors into the appliance terminal block or cord clamp, tighten the screws and secure the strain relief so the cable cannot pull loose. Ends can also be supplied tinned or pre-fitted with ring or fork terminals.

Can this 2-wire cord be used in place of a grounded 3-wire cord?

No. A 2-wire, non-earthed cord is only for double-insulated Class II appliances and must never replace an earthed cord on equipment needing a protective-earth connection.

What standard does this European cord meet, and what is EN 50075?

EN 50075 is the national standard the cord is manufactured and tested against; it defines the plug dimensions, pin layout and safety requirements for the target market. The certified cord carries the VDE, TUV approval and is supplied to that standard.

Can the opposite end be made to our drawing?

Yes. Send the end drawing and we will strip, tin or terminate the conductors to suit it. Typical finishes are set out in power cord wire end options .

Europe Power Cords, CEE 7/16 Plug, Type C, 2 poles, VDE, TUV Certified

Europe Power Cords, 2.5A 250V, Type C Plug. The Europe AC Cords according to CEE 7/16 Standards with VDE, TUV certification. Non-Rewirable Plug 2 poles without Earthing Contact Moulded with Non-rewirable Flexible Cords. This Europe Two prong Power Cords match cable for general applications include Flexible cables with thermoplastic PVC Insulation and Flexible cables with crosslinked elastomeric Rubber Insulation in Europe market. Our Europe Power Cords Products are fully molded with a low profile ergonomic design and RoHS and Reach compliant.

Electrical Rating:2.5A

Voltage:250V

Plug / Connector:CEE 7/16

Number of Poles and Wires:2 poles, 2 wires

Approvals:VDE, TUV Certified

Samples:Available
Batch lead time:15-20workdays
MOQ:200 - 1000 Pieces
Production capacity:2 million pieces per month
Currency:Export business supports settlement in RMB, USD, EUR and GBP etc.
Export rights:We are a China-based factory with our own export license.

The basic standard used to investigate products in this category is CEE standard XVI (CEE 7/16) Europlug EN50075, and the assembly is supplied under VDE, TUV Certified marking, RoHS and REACH compliant.

Categories: European VDE Power Cords

Europe Power Cords, CEE 7/16 Plug, Type C, 2 poles, VDE, TUV Certified Product Description


Plug / Connector Standard:	CEE 7/16
Approvals:	VDE, TUV Certified
Maximum Current rating:	2.5A
Maximum Voltage:	250V
Number of Poles and Wires:	2 poles, 2 wires
Indoor/Outdoor:	Both Available
Copper Conductor Material:	Oxygen free Copper (OFCU)
Outer Jacket Material:	PVC, Rubber, Halogen-Free, Textile braid
Blade Material:	Nickel Coated Brass
Flamability Rating:	UL 94V-0
Color	Black / White are standards, but any color available customized
Environmental Certifications:	RoHS, Reach, PAHs, Prop 65
Testing:	Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity
Country of Origin:	Made In China
Packing:	Standard Export Carton, Pallets

Europe Power Cords, CEE 7/16 Plug, Type C, 2 poles, VDE, TUV Certified Available Cord / Cables Wire Styles

Gauge/ # Conductors	Cord Type
2x0.5mm²	H03VV-F, H03VVH2-F
2x0.75mm²	H03VV-F, H03VVH2-F, H05VV-F, H05VVH2-F, H05RR-F, H05RN-F, H03RT-H, H05Z1Z1-F, H05Z1Z1H2-F
2x1.0mm²	H05VV-F, H05VV-F, H05RR-F, H05RN-F, H03RT-H, H05Z1Z1-F, H05Z1Z1H2-F