NEMA SS1-50P Male Twist Locking Plug American Power Cord, 50A, 3φ Y 347/600V, UL/cULus/ETL Certified
NEMA SS1-50P
The NEMA SS1-50P is a 50A 3φ Y 347/600V Male Twist Locking Plug with 3 prong 2 poles 3 wires, designed for marine shore power connections, older boat docks, and RV parks with 125V service. This American Power Cord is UL/cULus/ETL certified and constructed with RoHS, REACH, PAHS, and Prop65 compliant materials. Engineered to NEMA WD-6 standards for reliable marine-grade locking power.
RV Adapter Cord Sets, 50A NEMA SS1-50P to 30A NEMA L5-30R X2, Twist Locking Plug, 125V/250V, with Y Splitter, use for EV Power Cables, Generator Adapter Cord Sets, Yacht Shore Power Adapter Cord Sets
Yacht Shore Power Extension Cords, 50A NEMA SS1-50P to 50A NEMA SS1-50R, Twist Locking Plug, 125V/250V, use for Yacht Power Cords, Generator Extension Cords, Yacht Shore Power Adapter Cord Sets
RV Adapter Cord Sets, 50A NEMA SS1-50P to 30A NEMA L5-30R, Twist Locking Plug, 125V/250V, with Y Splitter, use for Generator Adapter Cord Sets, Yacht Shore Power Adapter Extension Cord Sets
Amperage:
50A to 30A
Voltage:
125V/250V
Plug / Connector:
NEMA SS1-50P to NEMA L5-30R
Of course, for more requirements regarding NEMA SS1-50P, please feel free to contact us immediately.
Power Cord & Power Connectors Manufacturer With RoHS, Reach, PAHs Compliant.
Frequently Asked Questions
Common questions about NEMA NEMA SS1-50P cords and connectors
The NEMA SS1-50P is a NEMA locking connector rated 50 A at 125 V, 2-pole, 3-wire (grounded), for single-phase circuits. The SS (shore ship) connector uses a threaded twist-locking ring that is tightened after insertion to prevent accidental disconnection and seal the connection on boats and RVs. The trailing P identifies it as a male plug; it pairs only with the matching NEMA SS1-50R.
The 50 A 125 V NEMA SS1-50P is typically used for 50 A 125 V marine shore-power connections on boats and yachts with a single-voltage shore system. Selecting the correct 50 A 125 V locking connector ensures the contacts and cable can carry the load without overheating and that the single-phase supply is connected with the proper grounding and polarity.
The NEMA SS1-50P is the locking male plug, typically fitted on the end of a power cord or equipment inlet lead, and it only mates with a matching NEMA SS1-50R female receptacle (socket-outlet or cord connector). It carries 50 A at 125 V in a 2-pole, 3-wire (grounded) configuration, so the outlet, wiring and overcurrent protection must all be rated for at least 50 A.
No. NEMA connectors are keyed by voltage, current, phase and grounding, so the NEMA SS1-50P mates only within its own 50 A 125 V family. The SS1-50 is a 125 V-only marine connector; the 4-wire SS2-50 provides 125/250 V and the two bodies are not interchangeable. When two configurations must be joined, use a properly rated, UL-listed adapter or cord set, and never exceed the lowest current rating in the chain.
Yes. We manufacture UL/cUL and ETL listed NEMA SS1-50P cord sets, rewireable plugs and receptacles, and molded connectors using RoHS, REACH, PAHS and Proposition 65 compliant cable, with custom lengths, wire gauges, jacket colors, strain relief and labeling. MOQ is typically 200-1000 pieces, samples ship in 7-15 days and bulk production takes 15-20 working days.
