NEMA 1-15P Male Plug American Power Cord, 15A, 125V, UL/cULus/ETL Certified
NEMA 1-15P
The NEMA 1-15P is a 15A 125V Male Plug with 2 prong 2 poles 2 wires, ideal for small appliances, lamps, and electronics in residential settings. This American Power Cord is UL/cULus/ETL certified and built with RoHS, REACH, PAHS, and Prop65 compliant materials. Manufactured to NEMA WD-6 standards, ensuring reliable performance and safety for everyday low-power devices.
Power Cord & Power Connectors Manufacturer With RoHS, Reach, PAHs Compliant.
Frequently Asked Questions
Common questions about NEMA NEMA 1-15P cords and connectors
The NEMA 1-15P is a NEMA connector rated 15 A at 125 V, 2-pole, 2-wire (ungrounded), for single-phase circuits. It uses the standard NEMA non-locking straight-blade configuration. The trailing P identifies it as a male plug; it pairs only with the matching NEMA 1-15R.
The 15 A 125 V NEMA 1-15P is typically used for older lamps, radios, clocks and small double-insulated household electronics that do not require an earth connection. Selecting the correct 15 A 125 V connector ensures the contacts and cable can carry the load without overheating and that the single-phase supply is connected with the proper grounding and polarity.
The NEMA 1-15P is the male plug, typically fitted on the end of a power cord or equipment inlet lead, and it only mates with a matching NEMA 1-15R female receptacle (socket-outlet or cord connector). It carries 15 A at 125 V in a 2-pole, 2-wire (ungrounded) configuration, so the outlet, wiring and overcurrent protection must all be rated for at least 15 A.
No. NEMA connectors are keyed by voltage, current, phase and grounding, so the NEMA 1-15P mates only within its own 15 A 125 V family. The ungrounded 1-series has no earth contact and must not be used on equipment requiring grounding; a grounded 5-15P plug cannot fit a 1-15R receptacle because the ground hole is absent. When two configurations must be joined, use a properly rated, UL-listed adapter or cord set, and never exceed the lowest current rating in the chain.
Yes. We manufacture UL/cUL and ETL listed NEMA 1-15P cord sets, rewireable plugs and receptacles, and molded connectors using RoHS, REACH, PAHS and Proposition 65 compliant cable, with custom lengths, wire gauges, jacket colors, strain relief and labeling. MOQ is typically 200-1000 pieces, samples ship in 7-15 days and bulk production takes 15-20 working days.
