Power Cords Supplier, Manufacturer In China

Swiss IP55 Waterproof Power Cords, SN 441011 Type 12 Plug, Type J, 3 Pins, SEV Certified

Swiss IP55 waterproof power cord with the SN 441011 Type 12 earthed plug, rated 10A 250V. Moulded body and sealing collar give IP55: dust-protected and resistant to water jets from any direction, for earthed outdoor equipment. H05VV-F, H05RR-F and H05RN-F cable from 3G0.75 to 3G1.5, SEV certified, RoHS and REACH compliant.
Electrical Rating:10A
Voltage:250V
Plug / Connector:SN 441011
Number of Poles and Wires:3 poles, 3 wires
Approvals:SEV Certified
  • Samples:Available
  • Batch lead time:15-20workdays
  • MOQ:200 - 1000 Pieces
  • Production capacity:2 million pieces per month
  • Currency:Export business supports settlement in RMB, USD, EUR and GBP etc.
  • Export rights:We are a China-based factory with our own export license.

The basic standard used to investigate products in this category is SN 441011, and the assembly is supplied under SEV Certified marking, RoHS and REACH compliant.

Swiss IP55 Waterproof Power Cords, SN 441011 Type 12 Plug, Type J, 3 Pins, SEV Certified Product Description

Plug / Connector Standard: SN 441011
Approvals: SEV Certified
Maximum Current rating: 10A
Maximum Voltage: 250V
Number of Poles and Wires: 3 poles, 3 wires
Indoor/Outdoor: Both Available
Copper Conductor Material: Oxygen free Copper (OFCU)
Outer Jacket Material: PVC, Rubber, Halogen-Free, Textile braid
Blade Material: Nickel Coated Brass
Flamability Rating: UL 94V-0
Color Black / White are standards, but any color available customized
Environmental Certifications: RoHS, Reach, PAHs, Prop 65
Testing: Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity
Country of Origin: Made In China
Packing: Standard Export Carton, Pallets

Swiss IP55 Waterproof Power Cords, SN 441011 Type 12 Plug, Type J, 3 Pins, SEV Certified Available Cord / Cables Wire Styles

Gauge/ # Conductors Cord Type
3x0.5mm² H03VV-F
3x0.75mm² H03VV-F, H05VV-F, H05RR-F, H05RN-F, H03RT-H, H05V2V2-F
3x1.0mm² H05VV-F, H05RR-F, H05RN-F, H03RT-H, H07RN-F, H05V2V2-F
3x1.5mm² H05VV-F, H05RR-F, H05RN-F, H03RT-H, H07RN-F
Different length, jacket color or plug? See how to customize a power cord.

Power Cords Terminals Processing Available Opposite End

The opposite end can be stripped back to a set length, fitted with terminals or finished with a connector, whichever the installation calls for.
The differences between those finishes are set out in power cord wire end options.
Remove Outer Jacket
Remove Outer Jacket
Remove Outer Jacket Semi-Strip
Remove Outer Jacket Semi-Strip
Semi-Strip, Cores Intact
Semi-Strip, Cores Intact
Tooth Terminals
Tooth Terminals
Metal Fasten Bolt
Metal Fasten Bolt
Ferrite Core, Anti-Interference
Ferrite Core, Anti-Interference
PG Waterproof Strain Relief
PG Waterproof Strain Relief
303 On/Off Switch
303 On/Off Switch
Foot On/Off Switch
Foot On/Off Switch

Packaging Method For Power Cords

Swiss SEV Power Cords Packaging with Export Cartons, Pallets, FCL or LCL, Container by Sea or Air.
Packaging Method

Related Product

Frequently Asked Questions

Common questions about this international power cord

IP55. SN 441011:2019 introduced the IP55 plug and socket-outlet system for outdoor use and replaced the earlier IP44 versions; this cord uses the earthed Type 12 IP55 plug.

Dust protection (IP5X) and protection against water jets from any direction (IPX5). It handles rain, splashing and hose-down; it is not submersible and should not be left standing in water.

Yes. The Type 12 body carries a full protective earth on the centre pin, so the metal housing stays bonded even with the seal closed. Use it on Class I equipment.

Pressure washers, pond and sump pumps, outdoor power tools, heaters and site lighting - anything earthed that gets wet. For double-insulated Class II appliances the 2-pin Type 12 version is enough.

It does. IP55 in use needs an IP55 socket-outlet; the plug alone stays dust-protected and jet-resistant, but a standard IP20 socket leaves the joint open to water. IP44 plugs from the older system fit only partly.

10A 250V, three conductors from 3G0.75 to 3G1.5 on H03VV-F, H05VV-F, H05RR-F or H05RN-F. The plug is SEV approved, materials are RoHS, REACH and PAHS compliant, and end finishes are set out in power cord wire end options.

Online Inquiry

Subject: Loading...
Captcha
E-mail If you have images or attachments, please email us.