Type: I

Australia Power Cords, AS/NZS 3112 Plug, Type I, 2 poles, SAA, RCM Certified

Australia Power Cords, 7.5A, 10A 250V, Type I Plug. The Australia AC Cords according to AS/NZS 3112 Standards with SAA, RCM certification. Non-Rewirable Plug 2 poles without Earthing Contact Moulded with Non-rewirable Flexible Cords. This Australia Two prong Power Cords match cable for general applications include Flexible cables with thermoplastic PVC Insulation and Flexible cables with crosslinked elastomeric Rubber Insulation in Australia market. Our Australia Power Cords Products are fully molded with a low profile ergonomic design and RoHS and Reach compliant.

Plug Type :I

Approvels :SAA, RCM Certified

Electrical Rating :7.5A, 10A

Voltage :250V

Plug / Connector Standards :AS/NZS 3112

Australia SAA, RCM 2 pins AS/NZS 3112 plug, Australia Power Supply Cords with SAA, RCM Certified List.
Built to AS/NZS 3112 standards.
Rated up to 7.5A, 10A 250V.

Categories: Australia SAA Power Cords

Australia Power Cords, AS/NZS 3112 Plug, Type I, 2 poles, SAA, RCM Certified Product Description


Plug / Connector Standard:	AS/NZS 3112
Maximum Current rating:	7.5A, 10A
Maximum Voltage:	250V
Number of Poles and Wires:	2 poles, 2 wires
Copper Conductor Material:	Oxygen free Copper (OFCU)
Outer Jacket Material:	PVC, Rubber, Halogen-Free, Textile braid
Blade Material:	Nickel Coated Brass
Flamability Rating:	UL 94V-0
Color	Black / White are standards, but any color available customized
Environmental Certifications:	RoHS, Reach, PAHs
Testing:	Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity
Country of Origin:	Made In China
Packing:	Standard Export Carton

Australia Power Cords, AS/NZS 3112 Plug, Type I, 2 poles, SAA, RCM Certified Available Cord / Cables Wire Styles

Gauge/ # Conductors	Cord Type
2X0.75mm²	4V-75, DL2 4V-75, H03VVH2-F, H05VV-F
2x1.0mm²	4V-75, DL2 4V-75, H03VVH2-F, H05VV-F

More pictures of Power Cords for reference:

Australia Power Cords, AS/NZS 3112 Plug, Type I, 2 poles, SAA, RCM Certified, Grey

Power Cords Terminals Processing Available Opposite End

We have the ability to customize the opposite end of various power cords, stripping cables,
including any terminals, Strain Relief customization and design.
To match the personalization request in field of power cord connectors of each customer.

Remove Outer Jacket

Remove Outer Jacket
Semi-Strip

Remove Outer Jacket
Tooth Terminals

Remove Outer Jacket
Tinned

Cable Clamp
Strain Relief

Remove Outer Jacket
Terminals / Sleeve

Remove Outer Jacket
Round Ring Terminals

Remove Outer Jacket
Connector

IEC 60320 C7 Connector

IEC 60320 C7 Angle Connector

IEC 60320 C17 Connector

Power Cord, Lamp Cords Available with Switch and Lamp Socket

Common on-line switch, lamp holder socket to salt lamp, with various accessories to make lamp cords.

303 On/Off Switch on-line

304 On/Off on-line

Foot On/Off Switch on-line

Rotary Switch on-line

Dimmer Switch on-line

Lamp Sockets: E12, E14, E26, E27, Hooks, etc for SAA 2 pins AS/NZS 3112 Plug, Australia Power Supply Cords

Packaging Method For Power Cords

Australia SAA Power Cords Packaging with Export Cartons, Pallets, FCL or LCL, Container by Sea or Air.

Frequently Asked Questions

Common questions about this international power cord

This is a mains cord set with a moulded AS/NZS 3112, Type I plug rated 7.5A, 10A 250V, a 2-core, non-earthed cord for Class II (double-insulated) appliances. The free (equipment) end is supplied with the outer jacket removed and the conductors stripped and prepared for direct wiring into the appliance, terminal block or strain-relief clamp. It is approved to SAA, RCM for Australia and New Zealand.

The finished cord set is certified to SAA, RCM for Australia and New Zealand, so it matches the mandatory plug and safety approval used on that market; test reports and the certificate are available on request. The cable uses RoHS/REACH/PAHS-compliant materials.

The free end is wired directly into the equipment or a terminal block; the conductors can be supplied tinned or fitted with ring/spade terminals on request. A moulded IEC 60320 connector (C5, C7, C13, C15 or C19) can be fitted instead if the appliance inlet requires one, with the conductor gauge matched to the load current.

No. The cord only carries power and does not convert voltage or current; verify the appliance accepts the local supply voltage and that the load is within the cord's 7.5A, 10A rating.

Power Cords Supplier, Manufacturer In China

Australia Power Cords, AS/NZS 3112 Plug, Type I, 2 poles, SAA, RCM Certified

Australia Power Cords, AS/NZS 3112 Plug, Type I, 2 poles, SAA, RCM Certified Product Description

Plug / Connector Standard:

Maximum Current rating:

Maximum Voltage:

Number of Poles and Wires:

Copper Conductor Material:

Outer Jacket Material:

Blade Material:

Flamability Rating:

Color

Environmental Certifications:

Testing:

Country of Origin:

Packing:

Australia Power Cords, AS/NZS 3112 Plug, Type I, 2 poles, SAA, RCM Certified Available Cord / Cables Wire Styles

More pictures of Power Cords for reference:

Power Cords Terminals Processing Available Opposite End

Remove Outer Jacket

Remove Outer Jacket Semi-Strip

Remove Outer Jacket Tooth Terminals

Remove Outer Jacket Tinned

Cable Clamp Strain Relief

Remove Outer Jacket Terminals / Sleeve

Remove Outer Jacket Round Ring Terminals

Remove Outer Jacket Connector