What is the IEC 60320 right-angle polarized C7?

The right-angle polarized C7 is the IEC 60320 female line connector (the cord-set / appliance-coupler side) that mates with a C8 connector, rated 2.5 A at 125/250 V with a 70 °C temperature class and no earth contact - a 2-core part for Class II / double-insulated equipment only. It is typically used on TVs, audio gear, game consoles, routers and non-grounded adapters (the figure-8 cord).

When should a right-angle C7 be chosen over a straight one?

Choose the right-angle C7 where equipment sits close to a wall or in a crowded rack: the 90-degree exit removes the straight connector's rear depth and avoids a sharp bend at the C7/C8 joint, while keeping the 2.5 A rating and still mating with C8. It is polarized (one round, one flat side) and only enters a polarized C8 one way.

Can the figure-8 right-angle polarized C7 be swapped for a C5 or C13?

No. The 2-core, non-earthed C7 mates only with a C8 inlet and has a different pin pattern from the earthed three-lobed C5 or the larger earthed C13; it is for Class II devices such as TVs and adapters. A polarized C8 inlet needs the polarized C7.

Which standard defines the right-angle polarized C7?

It is defined by IEC 60320-1, the C7/C8 appliance-coupler sheet, which fixes the pin layout, 2.5 A current, 70 °C temperature class and mating; production cord sets also carry the relevant national plug approvals (e.g. UL, VDE, SAA or PSE).

Can you change the opposite end on an IEC cord?

Yes, the opposite end can be stripped, tinned or terminated with a connector to your drawing. Each finish is shown in power cord wire end options .

IEC Power Cords, IEC 60320 C7 Right Angle Polarized Connector Plug, Type C7, 2 poles, 2 wires, UL, ETL, VDE, TUV, SAA, KC, PSE Certified

The Type C7 IEC power cord is a two-pole ungrounded figure-8 (infinity) lead rated 2.5A, 7A, 125V/250V, that connects to an IEC 60320 C8 appliance inlet. This Right Angle Polarized C7 connector plug is manufactured to the IEC 60320 C7 connector standard, and is available certified to UL, ETL, VDE, TUV, SAA, KC and PSE. The molded, polarized C7 coupler carries line and neutral contacts in a fixed orientation, ensuring a consistent and correct polarity when mated with the matching polarized IEC 60320 C8 appliance inlet. It suits double-insulated Class II equipment that needs no protective earth. The matching flexible cord is offered with PVC or crosslinked rubber insulation for dependable everyday performance, and it is widely used for televisions, monitors, sound systems, game consoles, set-top boxes and chargers. We supply fully molded, low-profile, right-angle polarized C7 cords with custom cable length, wire gauge and jacket color, manufactured to RoHS and REACH standards; OEM and ODM projects are welcome.

Electrical Rating:2.5A, 7A

Voltage:125V/250V

Plug / Connector:IEC 60320 C7

Number of Poles and Wires:2 poles, 2 wires

Approvels:UL/ETL/cULus Certified

Samples:Available
Batch lead time:15-20workdays
MOQ:200 - 1000 Pieces
Production capacity:2 million pieces per month
Currency:Export business supports settlement in RMB, USD, EUR and GBP etc.
Export rights:We are a China-based factory with our own export license.

IEC 60320 is an international standard published by the International Electrotechnical Commission (IEC), titled "Appliance couplers for household and similar general purposes". It specifies the dimensional, electrical, and safety requirements for couplers used to connect power supply cords to electrical appliances, covering voltages up to 250 V a.c. and currents up to 16 A. The standard is divided into several parts, with the most important being IEC 60320-1 (General requirements), which has undergone multiple revisions: the first edition was published in 1994, the second in 2001, the third in 2015, and the latest effective edition is the fourth edition, IEC 60320-1:2021, released on 27 July 2021. Additional parts include IEC 60320-2-X series for specific applications (e.g., sewing machine couplers, couplers with higher IP ratings) and IEC 60320-3 for standard sheets and gauges.

Categories: IEC 60320 Power Cord Connectors

IEC Power Cords, IEC 60320 C7 Right Angle Polarized Connector Plug, Type C7, 2 poles, 2 wires, UL, ETL, VDE, TUV, SAA, KC, PSE Certified Product Description


Plug / Connector Standard:	IEC 60320 C7
Approvals:	UL/ETL/cULus, TUV, VDE, KC, PSE Certifications
Maximum Current rating:	2.5A, 7A
Maximum Voltage:	125V/250V
Number of Poles and Wires:	2 poles, 2 wires
Indoor/Outdoor:	Both Available
Copper Conductor Material:	Oxygen free Copper (OFCU)
Outer Jacket Material:	PVC, Rubber, Halogen-Free, Textile braid
Blade Material:	Nickel Coated Brass
Flamability Rating:	UL 94V-0
Color	Black / White are standards, but any color available customized
Environmental Certifications:	RoHS, Reach, PAHs, Prop 65
Testing:	Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity
Country of Origin:	Made In China
Packing:	Standard Export Carton, Pallets

IEC Power Cords, IEC 60320 C7 Right Angle Polarized Connector Plug, Type C7, 2 poles, 2 wires, UL, ETL, VDE, TUV, SAA, KC, PSE Certified Available Cord / Cables Wire Styles

Gauge/ # Conductors	Cord Type
18/2	SPT-1, SPT-2, NISPT-1, NISPT-2, HPN
16/2	SPT-2, NISPT-2, HPN
2x0.5mm²	H03VV-F, H03VVH2-F, RVVB, RVV
2x0.75mm²	H03VV-F, H03VVH2-F, H05VV-F, H05VVH2-F, H05RR-F, H05RN-F, RVVB, RVV
2x1.0mm²	H05VV-F, H05VV-F, H05RR-F, H05RN-F, RVV

This cord can also be supplied in other lengths, colors and plug types. See how to customize a power cord.

Power Cords Supplier, Manufacturer In China

IEC Power Cords, IEC 60320 C7 Right Angle Polarized Connector Plug, Type C7, 2 poles, 2 wires, UL, ETL, VDE, TUV, SAA, KC, PSE Certified